Prusa CORE One L+ Nozzle Wiper A self-made Prusa CORE One L+ nozzle wiper  designed to work with the native Prusa firmware cleaning routine . I made it by scanning the original part and retro-engineered it as close as the original one. It works with the Prusa routine. PARTS You will need: - the printed nozzle wiper holder - silicone nozzle wiping insert/pad - expansion joint - M3 hardware (M3x6r screw, M3x8 screw, M3nN nut) PRINTING TIPS - Layer height: 0.20 mm - Perimeters: 4–5 - Top/bottom solid layers: 5 - Infill: 30–40% - Infill pattern: Gyroid, Grid or similar MATERIALS PC-CF is used on the original part, so use this or equivalent (ASA-CF, PA-CF, PC...) OTHER ADVICES I added a STP file if you want to remix it. /!\ If you do, after installing your new remixed holder, I strongly recommend performing the first G12 manually while watching the printer. The nozzle should follow the native firmware cleaning path and correctly contact the wiping area. /!\