BEARINGS - Print in place - with real rolling elements

Print in Place Bearings with real rolling elements. ! ATTENTION ! - these models are hard to print and fail easily. - your printer MUST be able to print gaps of 0,1mm width - clean your printbed - make sure, great adhesion is possible - elements might stick to each other, free the parts by moving and cleaning - the rolling elements of the bigger bearings might heave to be wiggled free with tweezers   ! YOU HAVE BEEN WARNED ! my working settings: eSun PLA+ layer height: 0,08 flowrate: 12mm³/s wall loops: 3 top layers: 4 bottom layers: 4 seam position: aligned infill: gyroid, 30% printer: bambulab x1c Available Sizes: 608 — 8/22/7 609 — 9/24/7 6000 — 10/26/8 6002 — 15/32/9 6004 — 20/42/12 Filename: Bearing# —  inner-Diameter / outer-Diamter / height example: 608 —  8/22/7 => 8mm hole, 22mm outer diameter, 7mm height