OpenPrintTag SpoolAdapter Slim

Description This is a set of snap-in spool adapters designed for the OpenPrintTag . These adapters are the slim version of the original model . Also, you can use this adapter to reuse the OpenPrintTag without having to worry about the adhesive not sticking anymore. Why use this? Fits many spools that are normally incompatible with OpenPrintTag Snap-fit engagement - clicks into place and holds firmly Reusable - just pull it out and transfer it to the next spool Compatibility - works with the Core One+ Spoolholder (slim version in blue, original in orange) Spools Some brands change spooltype or use the same spooltype as other brands. Use this table to find the right file for your spool.  Tip: For paper spools, twist the SpoolAdapter while inserting. Brand/Type Spool Slim version 3DJake AmazonBasic  add:north 1kg (no image available) ✅ add:north 750g untested ✅ Bambu Lab untested ✅ Elegoo (no image available) ✅ Eryone ✅ Geetech Coming soon. Use this instead. Overture ✅ Panchroma by Polymaker ✅ Polymaker ✅ Prusament (cardboard-core) 1kg & 2kg ✅ Recycling Fabrik MultiSpool  ✅ Sunlu (old) Coming soon. Use this instead. Sunlu (1st Gen) Jayo Coming soon. Use this instead. Sunlu (2nd Gen)  ✅ Sunlu (3rd Gen)  ✅ Tinmorry A Coming soon. Use this instead. Tinmorry B  Coming soon. Use this instead. Tinmorry C  ✅ Printing recommendations Property Value Material PLA Nozzle 0.4 mm Layer height 0.2 mm Perimeters 2 recommended Infill 10 % gyroid Supports Not required Brim Not required No post-processing is required. Simply click the adapter into the spool and stick the OpenPrintTag into place. Feedback If you want adapters for more spool brands, leave a comment with the  exact inner diameter, thickness, brand and a photo.  I'm happy to add more!